Saturday, July 18, 2015

electromagnetism - How can there be a voltage across an inductor if the voltage through any conductor is zero?


It's commonly taught that the electric field in a conductive material is zero. Hence the voltage through a perfectly conductive material is zero. I however when learning about inductors in physics assumed the presence of changing magnetic fields to be an exception to this rule. An ideal inductor is assumed to have a resistance of zero but has a voltage of $-L \frac{\mathrm{dI} }{\mathrm{d} t}$. This means the magnetic fields must produce electric fields inside the coil. We get this from: $\nabla \times E = -\frac{\mathrm{dB} }{\mathrm{d} t}$. I, however, read the Feynman Lectures on the topic and he says:



As we have seen before, there can be no electric fields inside a perfect conductor. (The smallest fields would produce infinite currents.) Therefore the integral from a to b via the coil is zero. The whole contribution to the line integral of E comes from the path outside the inductance from terminal b to terminal a. Since we have assumed that there are no magnetic fields in the space outside of the “box,” this part of the integral is independent of the path chosen and we can define the potentials of the two terminals.



My question is how does zero voltage through the inductor coil amount to a voltage between the ends? At what point in the wire is this voltage introduced?



Answer




This means the magnetic fields must produce electric fields inside the coil.




Yes, but this electric field, called induced electric field $\mathbf E_i$ , is only one component of total field in the conductor of the coil. It is not the total field.


Total electric field in an ideal wire of the coil is zero, but this does not imply that voltage on the terminals has to be zero. Voltage in AC circuits is not defined by total electric field, but only by its Coulomb ("electrostatic") component. This is because voltage comes from electrostatics and only makes sense for electrostatic field.


In an ideal conductor, total electric field has to be zero, so any induced electric field has to be counteracted and cancelled by some other contribution to the field, of same magnitude but opposite direction in space. Electric field that is always present in electric circuits is the Coulomb field $\mathbf E_{Coulomb}$ due to charges on conductors' surfaces. This field is zero inside conductors in the special case where everything is in static equilibrium, but as soon as charges accelerate (when electric current changes), the Coulomb field will be non-zero inside conductors, so that it can cancel the induced field. So, in the conductor of coil with changing current, the induced electric field due to accelerated charges in the coil is cancelled by the Coulomb field of all the charges in the circuit (mostly on the surfaces of the conductors in the circuit).


Voltage is integral of this Coulomb, or "electrostatic" component of the field. It is electrostatic in the sense it is the potential Coulomb field. Its integral is therefore independent of the path, it only depends on the endpoints. To calculate voltage between coil terminals A and B, one can use the path that the charge carriers actually follow, but if one chose a path that went out of that path and then back, as long as the endpoints are the same, the result would be the same.


Induced electromotive force (emf), on the other hand, is integral of the induced electric field, and does depend not only on the endpoints, but also on the path. However, usually we are interested only in the value of emf for the path the charge carriers in the coil go through.


Let motion "from A to B" be the positive sense of circulation in the circuit. Then the value of the emf for this oriented path is, in the common convention,


$$ emf(A~to~ B) = \int_A^B \mathbf E_i\cdot d\mathbf s = -L\frac{dI}{dt}.~~~(1) $$


Since induced electric field is everywhere in the ideal coil cancelled by the Coulomb electric field, the integral of this Coulomb field has to have the opposite value: $$ \int_A^B \mathbf E_{Coulomb}\cdot d\mathbf s = + L\frac{dI}{dt}.~~~(2) $$ This integral is also the difference of potentials $\varphi_B - \varphi_A$, i.e. voltage of B with respect to A.


In real coils, this cancellation of electric field components is not complete and total electric field is not necessarily zero. Thus voltage does not cancel emf exactly. Emf is still given by the general formula (1), but real case voltage has no such general formula as (2), that formula is valid only in the ideal case.


However, if the conductor is Ohmic, we can find a different relation between the emf and voltage. We can write the generalized Ohm law for the coil:



$$ \int_{A,~through~the~path~of~the~current}^B (\mathbf E_i + \mathbf E_{Coulomb})\cdot d\mathbf s = RI $$ where $R$ is Ohmic resistance of the coil conductor from $A$ to $B$. Using emf and voltage, this is


$$ emf(A~to~B) + (\varphi_B-\varphi_A) = RI $$


So emf and voltage no longer cancel each other completely, but their sum is "net active force" that pushes the current against the resistance; the greater the resistance, the greater the difference of emf and voltage magnitudes has to be to maintain the same current.


No comments:

Post a Comment

classical mechanics - Moment of a force about a given axis (Torque) - Scalar or vectorial?

I am studying Statics and saw that: The moment of a force about a given axis (or Torque) is defined by the equation: $M_X = (\vec r \times \...